Unitree G1 Edu Ultimate D Humanoid Robot With 5 Finger Hands With Tactile Sensor (G1EDU-U6)
Skladem
- ZNAČKA:
- UNITREE ROBOTICS
- MODEL:
- G1 EDU ULTIMATE D
- ČÁST #:
- G1EDU-U6
- ORIGIN:
- Čína
- Warranty:
- 18 MONTHS
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Unitree-G1-Edu-U6
Buy now, pay later
Unitree G1 Edu Ultimate D Humanoid Robot With 5 Finger Hands With Tactile Sensor (G1EDU-U6)
Unitree sells the G1 in more than a dozen configurations, and the names give nothing away. Ultimate A, B, C, D; U1 through U14. Buyers routinely order the wrong one and discover the hands cannot do what their research needs — a correctable mistake, since the hands can be changed, but an expensive and time-consuming one. The G1EDU-U6 sits at the top of the Ultimate line, and the reason to choose it comes down to one thing: it is the configuration with five-finger hands that can feel what they are holding.
What the G1EDU-U6 is
The U6 — Unitree's G1 EDU Ultimate D — is the most dexterous build of the G1 humanoid. It pairs the standard G1 body and legs with upgraded arms, a three-degree waist, and a pair of Inspire five-finger dexterous hands carrying tactile sensors in the fingertips and palm. Where most humanoids in this price class grip, the U6 can sense contact and slip while gripping, which is what manipulation research actually requires.
It is an EDU-line robot, meaning it ships with development access rather than as a sealed appliance: documented interfaces, SDK access and the expectation that you will write your own controllers.
Decoding the G1 configurations
This is where most buying mistakes happen, so it is worth being blunt about what separates the builds.
| Code | Name | What you actually get |
|---|---|---|
| U1 | Standard | Base EDU build, 40 TOPS compute, simple end effectors |
| U2 | Plus | Adds the expansion dock and 100 TOPS compute |
| U3 | Ultimate A | Waist upgraded to 3 DOF, arms to 7 DOF each, Dex3-1 three-finger force-controlled hands |
| U4 | Ultimate B | As U3, with tactile sensing added to the three-finger hands |
| U5 | Ultimate C | Five-finger Inspire hands, no tactile sensing |
| U6 | Ultimate D | Five-finger Inspire hands with tactile sensors — the most dexterous build |
| U7 | Ultimate E | Five-finger hands from a different supplier again |
Three hand families run through the range: Unitree's own three-finger Dex3-1 with force control, the five-finger Inspire RH56, and a third five-finger option on later builds. More fingers is not automatically better — a force-controlled three-finger hand is more robust for repetitive grasping, while five fingers with touch feedback suit in-hand manipulation and human-like grasp research. Buy for the task.
Compare the neighbouring builds directly: U3 Ultimate A, U4 Ultimate B, U5 Ultimate C and U7 Ultimate E.
G1EDU-U6 specifications
| Specification | G1EDU-U6 |
|---|---|
| Standing size | 1320 × 450 × 200 mm |
| Weight | About 35 kg in EDU configuration |
| Degrees of freedom | Up to 41, including hands |
| Arms | 7 DOF per arm |
| Waist | 3 DOF |
| Hands | Five-finger dexterous hands with tactile sensors in fingers and palm |
| Compute | NVIDIA Jetson Orin module, 100 TOPS class |
| Perception | 3D LiDAR and depth camera |
| Connectivity | Wi-Fi 6, Bluetooth 5.2 |
| Battery life | About 2 hours |
Figures reflect Unitree's published family specifications. Degrees of freedom, hand model and accessories vary by configuration and production batch, so confirm the exact build on your quotation before ordering.
Why tactile sensing matters
A robot hand without touch feedback is working blind. It knows where its fingers are, not what is between them. That is adequate for picking a known object from a known position, and inadequate for almost everything interesting: grasping something deformable, adjusting when an object starts to slip, or learning a grasp from demonstration.
The U6's hands report contact across the fingers and palm, which is what makes slip detection and closed-loop grasp control possible on the hardware rather than in simulation alone. If your research involves manipulation, this is the difference between a platform you can publish on and one you will outgrow in a term.
Who buys the U6
- Manipulation research groups — grasp planning, in-hand manipulation, tactile learning
- Embodied AI labs — imitation learning and sim-to-real work needing a full-body platform with capable hands
- University teaching at postgraduate level — where students need the full sensing stack, not a demonstration robot
- Robotics companies prototyping — proving a humanoid manipulation concept before building custom hardware
- Demonstration of advanced capability — where a three-finger gripper would undersell the work
Strengths and limitations
The strengths are specific: the most capable hands in the G1 range, 7 DOF arms and a 3 DOF waist that together give a genuinely useful workspace, strong onboard compute, and a mature SDK with a large installed base behind it — the G1 has more published research and third-party code than any comparable platform.
The limitations are equally specific. Two hours of battery means spares for a working day. Dexterous hands are the most delicate part of any humanoid and the most expensive to repair, so budget accordingly and use a gantry during early testing. And at about 35 kg this is a research platform, not industrial equipment — it is not rated for unsupervised work alongside the public.
How to choose your configuration
- Start with the hands. They define what research you can do. The hands can be changed later, but specifying them correctly up front avoids the cost and downtime of swapping them. Five fingers with tactile sensing (U6) for manipulation; three-finger force control (U3, U4) for robust repeated grasping.
- Then the arms and waist. The Ultimate builds give 7 DOF arms and a 3 DOF waist. Reaching tasks need them; locomotion work may not.
- Then compute. If you are running vision and learning models on board, specify the higher-TOPS build.
- Then accessories. Spare battery, gantry and controller are near-essential and often forgotten — the starter kit shows the typical bundle.
If a biped is more than you need, or you want to compare across the range, see all humanoid robots and the dexterous robot hands sold separately.
Safety and standards
The G1 EDU is research and development equipment. It is not certified industrial machinery, so the industrial robot safety standards (ISO 10218, ANSI/RIA R15.06) and the mobile robot standard R15.08 do not cover it. The duty of care sits with the operator.
In practice: define and mark a working area, keep untrained people out of it, keep a trained operator with the emergency stop within reach, use a support gantry while developing locomotion, and complete a written risk assessment before any public demonstration. A 35 kg biped moving at speed will injure someone if treated as a toy.
Lithium batteries are regulated dangerous goods in transit, which affects how spares are shipped and how quickly.
Deploying a G1EDU-U6
- Prepare the space — clear flat area, gantry or overhead support, safe charging point.
- Plan power — two hours per battery; most labs run two or three.
- Simulate first — develop in simulation, then move to hardware. Falls are cheaper in software.
- Protect the hands — the dexterous hands are the costliest component. Many labs develop locomotion with simple end effectors fitted and swap the hands in for manipulation work.
- Train operators — stop procedure before first walk, every time.
Price and cost of ownership
Current pricing for the U6 and the neighbouring configurations is shown on the listing above. Beyond the robot, budget for spare batteries, a gantry, a controller, and a realistic allowance for hand repair — on a manipulation platform that is the component that wears. International buyers should add duty and import charges. For quantities, grant-funded purchases or a bundle with accessories, ask for a written quotation rather than ordering line by line.
Import and delivery
G1 units ship from the manufacturer and lead times follow production batches rather than a fixed schedule. Lithium batteries restrict some shipping routes and add documentation. Tell us the destination country when you enquire and we will confirm delivered cost, a realistic lead time and the paperwork required before you commit.
Support before and after the sale
Before you buy, our team will confirm which configuration matches the research you intend to do — the hands in particular — and which accessories you will genuinely need. Given how similar the configuration names are, that conversation prevents the most expensive mistake in this range.
After delivery, we assist with setup questions, sourcing spare batteries and replacement parts, and escalating warranty matters to the manufacturer. Support terms vary by configuration and destination; confirm the specifics for your order on your quotation.
Where to buy the G1EDU-U6
The U6 is listed above with current price and availability, alongside the other G1 configurations so you can compare before committing. Order directly, or contact our team for a formal quotation including delivery to your country. Universities and institutions buying against a purchase order or tender should request a written quotation first.
Frequently asked questions
How much does a Unitree G1EDU-U6 cost?
Current pricing is shown on the listing above. It sits at the upper end of the G1 range because of the five-finger tactile hands. Request a quotation for delivered pricing or quantities.
Where can I buy the G1 EDU Ultimate D?
Directly from the listing on this page, or by quotation if you need delivered pricing, a purchase order or a specific currency.
What is the difference between U5 and U6?
Both have five-finger hands. The U6 adds tactile sensors in the fingers and palm, enabling slip detection and closed-loop grasp control. If your work involves manipulation, that difference is the reason to buy the U6.
What is the difference between U4 and U6?
The U4 has three-finger force-controlled hands with tactile sensing; the U6 has five-finger hands with tactile sensing. Three fingers are more robust for repetitive grasping, five are better for human-like and in-hand manipulation.
How many degrees of freedom does the U6 have?
Up to 41 including the hands, with 7 DOF per arm and a 3 DOF waist. Published figures vary by configuration, so confirm on your quotation.
Can I upgrade the hands later?
Yes. The hands can be changed after purchase, and hands are also sold separately. It is still worth specifying the right configuration at order, because changing them later means additional cost and downtime, but you are not locked in. Ask us before ordering if you are unsure.
How long does the battery last?
About two hours per charge. Plan for at least one spare if the robot will be used for a full day.
Is the G1 EDU open for development?
Yes. The EDU line is sold for development, with SDK access and documented interfaces, and it has one of the largest bodies of third-party research code of any humanoid platform.
Is it safe to demonstrate in public?
Only with a defined working area, a trained operator holding the emergency stop and a written risk assessment. It is research equipment, not certified industrial machinery.
What accessories do I need?
At minimum a spare battery, a support gantry for development and a controller. See robot accessories, or the starter kit for the usual bundle.
Do you ship internationally?
Yes. Lithium batteries affect routing and lead time, so confirm the destination country when you enquire.
Is there a wheeled version?
Yes — the G1-D U6 puts a comparable dual-arm upper body on a wheeled base, which trades stair capability for stability and endurance.
Specifikace
General
Physical
Mobility
Performance
Computing
Sensors
Connectivity
Software
Battery + Power
Shipping
Funkce
| Equipped with all the functions of G1-Edu standard version |
| Upgraded from 1 to 3 degrees of freedom in the waist. |
| Single arm freedom upgraded from 5 to 7, both arms upgraded. |
| Up to 29 DOF for whole robot |