Unitree H2 EDU SMART B Humanoid Robot

The Unitree H2 EDU SMART B is a full-size bipedal research humanoid — 1.82 m, about 70 kg, 31 body joints — fitted with unitree dex3-1 three-finger dexterous hands, for 45 degrees of freedom in total. Complete SDK and ROS 2 access, 140-degree binocular vision and about three hours of battery.

En stock

MARQUE:
UNITREE ROBOTICS
MODÈLE:
H2-EDU-SMART-B
NUMÉRO DE PIÈCE #:
H2-EDU-SMART-B
ORIGIN:
Chine
Warranty:
12 MOIS
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Unitree-H2-EDU-SMART-B
77 122,81 €
HT: 77 122,81 €

Buy now, pay later

Livraison gratuite
Chargement en cours...

Unitree H2 EDU SMART B Humanoid Robot

Three fingers, force controlled, seven driven axes per hand. Fewer actuators than a five-finger hand means fewer failure points and firmer, more repeatable grasps — which is why a great deal of serious manipulation work chooses this over anything more human-shaped.

What it is

The Unitree H2 EDU SMART B is a full-size bipedal research humanoid: a 1.82 m, roughly 70 kg frame with 31 body joints, complete SDK and ROS 2 access to every actuator and sensor, a 140-degree binocular head camera and about three hours of battery, fitted with two Unitree Dex3-1 three-finger dexterous hands. Total freedom reaches 45 degrees. It is sold as a development platform on institutional, grant-eligible terms rather than as a closed product.

What the EDU edition actually buys you

The hardware is the same full-size H2 body across the range. What the EDU edition adds is access, and for a research programme that is the part that decides whether the robot is usable at all.

  • Complete SDK and ROS 2 access to every actuator and sensor, rather than the restricted interfaces of the base and Commercial versions. If you need low-level joint control, this is the edition that gives it to you.
  • Dexterous hand configuration — thirteen hand packages, from a parallel gripper to twenty-one-axis visuo-tactile research hands.
  • Compute options scaling to NVIDIA Jetson Thor at 2,070 TOPS, for running large perception and policy models on the robot itself.
  • Institutional warranty and grant-eligible purchasing terms, which matter as much as any specification when the money comes from a research council.

Be aware that the Jetson Thor module is a compute option on this line rather than something every configuration carries. Confirm the exact compute module on your quotation before ordering — it is the single most commonly misread item in this range, and we will put it in writing for you.

The thirteen hand options

Listed cheapest first. Total degrees of freedom is simply the 31 body joints plus twice the hand figure.

ConfigHandsDOF per handTactileTotal DOF
SMART ADex1-1 Advanced two-finger grippers1No33
SMART FBrainCo Revo 2 Basic five-finger hands6No43
SMART BUnitree Dex3-1 three-finger dexterous hands7No45
SMART HInspire DFQ five-finger hands6No43
SMART CUnitree Dex3-1 three-finger dexterous hands with tactile sensing7Yes45
SMART GBrainCo Revo 2 Touch five-finger hands6Yes43
SMART IInspire E2 five-finger hands with tactile sensing6Yes43
SMART DUnitree Dex5-1 dexterous hands16No63
SMART EUnitree Dex5-1 dexterous hands with tactile sensing16Yes63
SMART MWuji Hand 2 dexterous hands20No71
SMART JBrainCo Revo 3 Basic Senyun hands21No73
SMART KBrainCo Revo 3 Touch Senyun hands with tactile sensing21Yes73
SMART LBrainCo Revo 3 Vision Senyun hands with visuo-tactile sensing21Yes73

Hands are the largest cost variable in this range by a wide margin — the gap between the A and L configurations exceeds the price of the Standard robot. Choose from what the robot actually has to do, and ask us before assuming more axes is better.

Where this configuration sits

The SMART B is the full-size H2 EDU body with complete SDK and ROS 2 access, fitted with two Unitree Dex3-1 three-finger dexterous hands, for 45 degrees of freedom in total. On price it sits between the SMART F below it and the SMART H above. The SMART C is the same hands with tactile sensing. If you do not need hands fitted at all, the H2 EDU Standard is the same robot without them.

Unitree H2 EDU SMART B specifications

SpecificationValue
Height1,820 × 456 × 218 mm standing
WeightAbout 70 kg with battery
Body joints31 — 7 per arm, 6 per leg, 3 waist, 2 head
Joint torque120 N·m peak at the arm joints, 360 N·m at the leg joints
Payload7 kg rated, 15 kg peak
StructureAircraft-grade aluminium, titanium alloy and high-strength engineering plastics
ActuationLow-inertia internal-rotor PMSM motors with crossed roller bearings
HandsUnitree Dex3-1 three-finger dexterous hands
Hand degrees of freedom7 per hand
Tactile sensingNone
Total degrees of freedom45 (31 body + 7 per hand)
Development accessComplete SDK and ROS 2 access to every actuator and sensor
ComputeOptions scaling to NVIDIA Jetson Thor at 2,070 TOPS — confirm the module on your quotation
PerceptionBinocular head camera with 140° horizontal field of view; LiDAR optional
ConnectivityWi-Fi 6, Bluetooth 5.2, OTA updates
BatterySmart quick-release lithium battery, 15 Ah, about 3 hours
PurchasingInstitutional warranty and grant-eligible terms

Figures follow published specifications for this configuration and vary by production batch. Confirm the exact build on your quotation before ordering.

Who buys it

  • University laboratories needing low-level joint and sensor access
  • Manipulation and grasping research
  • Embodied-AI groups deploying learned policies on a full-size platform
  • Teaching programmes at human scale, on grant-eligible terms
  • Integrators and organisations evaluating physical AI systems

How to choose

Buy the SMART B if you need two Unitree Dex3-1 three-finger dexterous hands. Add tactile sensing with the SMART C. Work down the ladder rather than up if your pipeline will not read everything the hand reports — on this platform a configuration you fully use beats a dearer one you do not. If hands are not the point, the Standard is the honest choice and hands can be fitted later. Compare the whole field in our humanoid robots category.

Safety and standards

Be clear-eyed about this one. The H2 is 1.82 m tall, weighs about 70 kg and has leg joints rated to 360 N·m. That is a machine with the mass of an adult and far more joint torque, and it is research equipment: the industrial robot safety standards — ISO 10218 and the ANSI/RIA R15.06 family — and the mobile robot standard R15.08 do not cover it, so the duty of care sits entirely with you.

At minimum: a marked working area that untrained people cannot enter, a trained operator holding the emergency stop whenever the robot is powered, a support gantry during locomotion development, and a written risk assessment before any public demonstration. A fall from this robot can injure a bystander and will damage the robot. In a teaching environment, where students rather than engineers are at the controls, write the supervision rules down before the first session.

Lithium batteries are regulated dangerous goods in transit, which affects how spares ship and how quickly.

Deployment and running costs

Plan the site before the robot arrives. A full-size humanoid needs floor space with a marked working envelope, a route in that accommodates roughly 70 kg of crated machine, and somewhere secure to store and charge it. Budget for a spare battery — runtime is about three hours, generous for a humanoid but still finite — and a support gantry for locomotion work. End-effector spares matter more here than on any cheaper platform, because the hands on the upper configurations cost more than entire robots further down the range. Related parts are listed under robot accessories. International buyers should add duty and import charges. Current pricing is shown on the listing above; for quantities, grant purchases or bundles, request a written quotation.

Import and delivery

Units ship from the manufacturer and lead times follow production batches rather than a fixed schedule. This is a heavy, bulky crate and the lithium battery restricts some routes and adds documentation. Tell us the destination country when you enquire and we will confirm delivered cost, a realistic lead time and the paperwork required before you commit. For a purchase at this level we recommend settling delivery terms in writing before the order is placed.

Support before and after the sale

Before you buy, our team will work through the hand choice and the compute option with you in writing. On this range those two items account for most of the price difference between a sixty-thousand-dollar robot and a hundred-and-fifty-thousand-dollar one, and we will tell you when a cheaper configuration covers your work. After delivery, we help with training, set up and ongoing support. The specifics for your order are confirmed on your quotation.

Where to buy

This configuration is listed above with current price and availability, alongside the rest of the H2 EDU range so you can compare before committing. Order directly, or contact our team for a formal quotation including delivery to your country. Universities and institutions buying against a purchase order or a grant should request a written quotation first — the EDU edition is sold on grant-eligible terms.

Frequently asked questions

How much does a Unitree H2 EDU SMART B cost?

Current pricing is shown on the listing above. Request a quotation for delivered pricing or quantities.

What hands does the SMART B have?

Unitree Dex3-1 three-finger dexterous hands, with 7 driven axes per hand, without tactile sensing.

How many degrees of freedom does it have?

45 in total — the 31 body joints plus 7 per hand.

What is the difference between SMART B and SMART C?

Identical robots and identical hands; one adds tactile sensing. The SMART C is the tactile version.

How tall is the H2 EDU?

It stands 1,820 mm, so about 1.82 m, and weighs roughly 70 kg with battery.

How many joints does the body have?

31 — 7 in each arm, 6 in each leg, 3 at the waist and 2 in the head. Hands add to that total.

What does the EDU edition add?

Complete SDK and ROS 2 access to every actuator and sensor, dexterous hand configuration, compute options scaling to NVIDIA Jetson Thor, and institutional warranty and grant-eligible purchasing terms.

Does it include the Jetson Thor compute module?

Thor is a compute option on this line rather than standard on every configuration. Confirm the exact module on your quotation — it is the most commonly misread item in this range.

How much can it carry?

7 kg rated and 15 kg at peak.

How long does the battery last?

About three hours from a 15 Ah smart quick-release battery.

Is it safe around people?

Only with a marked working area, a trained operator on the emergency stop and a written risk assessment. This is a 70 kg machine with 360 N·m leg joints and it is not covered by the industrial robot safety standards.

Is it suitable for teaching?

Yes, and it is sold on grant-eligible terms for exactly that. Write your supervision rules down before students operate it.

Do you ship internationally?

Yes. The crate is heavy and the lithium battery affects routing, so confirm the destination country when you enquire.

Caractéristiques

General

MARQUE UNITREE ROBOTICS
MODÈLE H2-EDU-SMART-B
NUMÉRO DE PIÈCE # H2-EDU-SMART-B
FCC APPROVED Yes
FCC ID 2A5PE-YUSHU012

Software

DÉVELOPPEMENT SECONDAIRE PRIS EN CHARGE

Questions sur le produit

Aucune question pour le moment. Soyez le premier à en poser une.

0/255

Rédiger un commentaire
Vous commentez : Unitree H2 EDU SMART B Humanoid Robot
loader
Chargement en cours...

L’avis est en cours de validation.